Subject: TO4 turbo and HKS manifolds
From: ACRE NL
Date: 1/29/2002, 7:33 PM


Paul wrote:
I assume this is for a turbo version of the gen 3.
Did Greg Richter say his off the shelf  aftermarket HKS TO4 turbo
manifold cracked?
Greg Richter wrote:
Hi Dale,
The manifold is an HKS unit that the rotary racers like.  Heavy,
but bulletproof.
The HKS works with the Garrett TO4 so the bolt pattern is different
than the stock turbo bolt pattern I think. Perhaps an adapter can be made.
As a quick check the TO4 bolt pattern is 2.750 by 3.250 inches. My 91
turbo
is up at the hangar so I can't check at the moment. I know the 87-88
won't
fit the TO4 pattern.

If you go the HKS TO4 route you are looking at another $1000 for the
TO4.
Paul Lamar


I found a place that sell HKS manifolds:
OverBoost Store web site: http://www.overboost.com/obs/default.asp

HKS Turbo Exhaust Manifold 1987-1991 Mazda RX-7 Turbo II (13BT) Cast T04
Standard / Racing W/G
$ 247.80

I wonder if this is the same manifold that Greg used?  This is a good price
if it doesn't crack.  I have also seen TO3 to TO4 adapter plates for sale.



Paul,

I know your $1000 figure is correct, possibly even conservative ... but
FWIW, a new T04 is currently for sale on eBay at a bid price of $500 (as we
speak) ... URL is:

http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=601022275&
r=0&t=0

Since I am not in a buying mood after the new engine purchase, but I
thought I might post it for others on the list that might be.

Dale Smith


We need the details on that turbo but it sounds like a real buy if someone
does not mind a less than optimum match with the rotary.

Paul Lamar


I bought my used water-cooled TO4 on E-Bay for $365 but it needs a rebuild
($250?).  I see TO4's on E-Bay all time.  Manifolds too.
Ernesto

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org