Subject: turbo exaust manifolds
From: ACRE NL
Date: 1/29/2002, 8:55 AM

Part of the confusion here is these curves assume a 85% volumetric
efficiency for a Mazda 13B engine (red line). In actual fact the
Mazda 13B has about 120% volumetric efficiency (blue line).

Now Vance is going to jump in right about here and tell me
"I told you so!" the rotary engine is really 3.9L and not 2.6L.
Nothing to do with displacement directly Vance. It just breaths
like a 3.9 liter four cycle piston engine. 

Therefor you must adjust these curves by upping the displacement
for the rotary.

The other confusing factor here is Turbonetics is assuming you want good 
throttle response. Not needed in an aircraft engine.

My main concern is over speed at high altitudes and I intend
to install a turbo charger tach of some kind.

BTW we have discussed all most all of this at great length
in years gone by.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

turbo-selection-criteria.gif