Subject: 12A rotor gear failure
From: ACRE NL
Date: 1/31/2002, 11:44 PM

Ken Welter wrote:

   I run a 16 lb fly wheel and it is extremely smooth compared to
without, I switched to it when I was blowing dampers up on the ross
gearbox and it eliminated the problem and I tried to run my cog belt
without it and ended up going back to a flywheel and I think the
flywheel would help out the rotor and stationary gears also.

Ken Welter

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org