Tom Parkes wrote:
The latest issue of Contact! magazine (issue 66) should be read by any
and all Lancair builders using automobile engines. John Harlow
describes two independent problems encountered in his Chevy 350-powered
Lancair ES, which was damaged during an emergency landing last year.
The emergency landing followed a bearing failure on his Northwest Aero
belt redrive, and was discussed on the ACRE newletter.
The other problem he experienced is an apparent incompatability
encountered between mogas containing ethanol and the Hysol adhesive used
by many Lancair builders to close out their wings (including me). Hysol
has been typically used due to its longer working time as opposed to the
Jeffco epoxy formula most Lancair builders have been previously using,
which would set up before wing closeout could be finished. (Jeffco has
recently developed a longer cure time version of its epoxy system, and
Lancair now recommends its use for this critical operation.)
John's Lancair ES developed persistent fuel tank leaks after about four
years of flying with automobile gasoline. He discovered that the Hysol
squeeze-out from the seam at the closeout interface was being weakened
and breaking loose. Samples were sent to Lancair and Hysol for
analysis. Hysol said that there must have been some alcohol in the
fuel. Indeed, Tucson mandates seasonal use of ethanol to reduce
automotive emissions.
So, where does this lead us? First, any Lancair builders who have not
closed out their wings should consider the new slower curing Jeffco
epoxy. For those of us who have already crossed this divide, great care
must be exercised to avoid any auto fuels containing any kind of alcohol
(usually ethanol). Test kits are available for this purpose.
100LL avgas apparently has no adverse effect on Hysol adhesive, as
attested by several hundred Lancair builders who have successfully used
Hysol for many years. But use of 100LL in auto engines apparently has
its own set of precautions--espcially for those of us using Mobil 1
oil--if we can generalize from Mobil's abortive venture into aviation
engines.
Any other experiences along this line? Anyone?
Tom Parkes
Lancair ES
Prescott, AZ
tparkes@earthlink.net
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org