John Gibbons wrote:

Hello experts,

    Looking for suggestions on how to cool a 1 1/2 " diameter by 12 " hardened steel shaft to say - 50 degrees so as to be able to slip a gear on. Have heated the gear to 400 F and frozen the shaft but it is still a little too tight.
    Also what is the coating on that exhaust pipe that has been pictured lately and Paul the rotary anatomy picture was good, do you have a similar one for the various ports ?

Cheers,

John

I'll scrounge around for a port picture.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org