Subject: how to cool a 1 1/2 " diameter by 12 " hardened steel shaft
From: ACRE NL
Date: 2/1/2002, 7:42 AM

Robert Darrah wrote:

    Looking for suggestions on how to cool a 1 1/2 " diameter by 12 "
hardened steel shaft to say - 50 degrees so as to be able to slip a gear on.
Have heated the gear to 400 F and frozen the shaft but it is still a little
too tight.>

A bucket of alcohol and dry ice-darn cold!

Bob Darrah

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org