Subject: how to cool a 1 1/2 " diameter by 12 " hardened steel shaft
From: ACRE NL
Date: 2/1/2002, 12:30 PM


Tom wrote:

How low does dry ice go??  Otherwise, maybe vent some CO2 into an enclosure w/
the shaft in it??

Dry ice melts at -78C at standard pressure.  Because that temp is so much colder
than the rest of the environment, it is sucking the heat out of everything around
it; consequently, it's a challenge to get the shaft (or anything else) below
about -60C (the shaft starts to suck the heat out of warmer things around it).

Russell Kent


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org