Mark Steitle wrote:

Paul,
I incorrectly stated that the LS1 throttle body was 70mm.  Turns out it is
75mm, or approx. 3".  Solenoid and TPS can be removed.  Here are two better
pictures.  The pictures came off ebay, ref.
http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=601673059
with about 6 days to run.
Mark Steitle
Austin, TX
Lancair ES/20B

It is still a bit small for a 20B IMHO.

BTW over the road heavy duty truck engines are good examples. Check the size of their
plumping for a 350 HP engine. You will see four or five inch exhaust pipes
and huge intakes and air filters.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org