This is one issue that is preventing us from closing our sump and moving
on... eveerything in our canard is epoxy based and if we are going to be
using fuel from many sources this could get sticky.
Good pun, Chrissi, cause that is exactly what happens.
Bob Darrah
This is the post that I was looking for... yes it is Jeffco epoxy. Looks like we will be needing some of this now for sure.
*** Found out Lancair uses a fuel tank sealant made by a company
here in San Diego called JeffCo Expoxy Products. I've talked to their
engineer to verify that it's fuel proof against *ALL* fuels I will ever
use -- *any* kind of car gas, AV Gas, diesel, jet fuel (and anything
else one may need to use in the future). Since someday I may have to
use another fuel that may dissolve the resin I used in my strake tanks
for I switched engines for some reason, or the fuel's change/are
discontinued, as I mentioned, this is the way to go for me.
Oh -- you can brush, roll or spray it on; and it's gray.
Go to their web site at: http://www.JeffCoProducts.com .
Click on 'Product Index' or 'Epoxy Products'; then click on 'Epoxy
Specialties'; then click on '9700 FCR' ***
Hope this helps, Chrissi
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org