Subject: how to cool a 1 1/2 " diameter by 12 " hardened steel shaft
From: ACRE NL
Date: 2/2/2002, 8:46 AM


<< > John Gibbons wrote:
 >
 > Hello experts,
 >
 >     Looking for suggestions on how to cool a 1 1/2 " diameter by 12 "
hardened steel shaft to say - 50 degrees so as to be able to slip a gear on.
Have heated the gear to 400 F and frozen the shaft but it is still a little
too tight.
 >     Also what is the coating on that exhaust pipe that has been pictured
lately and Paul the rotary anatomy picture was good, do you have a similar
one for the various ports ?
 >
 > Cheers,
 >
 > John

 I'll scrounge around for a port picture.

 Paul Lamar >>

http://www.rotaryengineillustrated.com ------> Rotary Engine 101 ------> Porting.

Great site, really explains porting and the different types..ie Bridge, J,
Street...

BTW, His posters are very good for on the spot explanations of the Rotary.

Rob H


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org