Subject: how to cool a 1 1/2 " diameter by 12 " hardened steel shaft
From: ACRE NL
Date: 2/2/2002, 8:17 AM


Bill Schertz wrote:

Use dry-ice in an acetone bath

No sparks or flames nearby

Paul Lamar responded:

I have been waiting for confirmation on that. Why acetone Bill? What purpose
does it serve? Just curious.

You need a liquid to conduct the heat from the shaft to the dry ice (air makes a
poor thermal conductor).  I prefer rubbing alcohol to acetone, but either will
work.  Obviously you need a liquid compatible with the parts, and that does not
freeze at -78C (the melting point of dry ice at standard pressure).

Russell Kent


Ahh so! Very simple. A liquid that will not freeze. duh. What is that in F?

The liquid to air intercoolers guys are going to love it.

Paul Lamar


Safety note here:
If you use acetone, any dirt, oil, or other contaminant that it comes in
contact with will become airborne immediately.  Acetone evaporates
rapidly, taking those contaminants with it, and you guessed it, directly
into your lungs.  Flammability has already been covered.

AI Nut

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org