Paul,
The Ellison Fuel injector has two strips of teflon about 3/16" square in
slots in the aluminum slide.  Never had mine stick yet.  Have a slide body
for my 13B designed in my head.  Should it be successful it may be a
break-thru.
Maybe not.

Fly fast, land slow.
Bill

I'd love to get my hands on one for about a week..
...Chrissi

If this is not another innuendo (not to be confused with the Italian suppository)
designed to pull John's chain, 8>) you might contact Ben Ellison. They make a unit
large enough to feed the 340hp 0540s for the aerobatic crowd  If you could buy a
casting before it was machined for fuel passages, filter, idle circuit, metering
tube and mixture control, you would only need the housing and slide. This might be
fairly inexpensive and simple to finish out.
Herb

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org