I'd love to get my hands on one for about a week..
...Chrissi

If this is not another innuendo (not to be confused with the Italian suppository)
designed to pull John's chain, 8>) you might contact Ben Ellison. They make a unit
large enough to feed the 340hp 0540s for the aerobatic crowd  If you could buy a
casting before it was machined for fuel passages, filter, idle circuit, metering
tube and mixture control, you would only need the housing and slide. This might be
fairly inexpensive and simple to finish out.
Herb

We'll let John pull his own chain for the time being.... :)
Herb, that is a brilliant idea about the Ellison TB, will have to check that out.
We went to the car show yesterday, ho hum. Randi is the car nut and she was almost as bored as I was. The only thing that caught our attention was the Dodge concept car, we both liked that and Randi was glad it was not available.
The turbo Beetle was the most comfortable car, the NSX has finally grown up and no longer looks like a kit car.
I was looking at throttle bodies. They looked like they were about 3" max even on the performance corvette.
The vehicles I liked the most were first an Austin Healy bugeye Sprite shown by the local Healy club and second the full sized radio controlled dodge pickup flying overhead..neat trick.
...Chrissi

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org