Subject: 2nd-3rd Gen-13B/20B Cosmo port area
From: ACRE NL
Date: 2/5/2002, 5:41 PM


Paul I agree. I just dynoed a street port 86-88 six port. What a
disapointment. I used turbo rotor housings. I street ported the
exhaust which
wasn't much and enlarged the center housing, nothing with the end
ports( with
the sleves removed ). Went from 180 to 200. From 6700 rpm to 7700rpm
and
141ft/lbs to 148ft/lbs. Put on the 89 intake and went to 210hp and
152
ft/lbs. I had 175 hp@ 6,000. hell a stock 4-port does that without
doing
anything. As I speak their is a company in your area that has made a
six-port
into a four port. A big four port with not great results. Anyhow I'm
done
with those. Next on the dyno is a Cosmo 13B , ported with ceramic
seals. Have
you seen these engines? It has 20B housings and porting stock, wich
is much
larger than 3rd gen engines. Skip
Snip

      Skip,  SkipnNance@aol.com


   Let me get this straight. I agree the 13B/20B Cosmo ports are larger
than
 86-91 second generation but I understood that the 93-95 third
generation ports
 are the same size as 13B/20B Cosmo ports. Whats the straight skinny?

      Kelly Troyer


You can put in the year and side or center housing port and this real cool
interactive web page will show you the port size and timing.

http://www.rotaryengineillustrated.com/RE101pages/4-ports101.html

Here is the side port size and timing for the 93-95 side ports.
Unfortunately there is nothing for the Cosmo or 20B.

Paul Lamar


Boy, thanks for the URL.   I can see now that I did not port my 91 block
sufficient to even be considered Street ported.  Just too cautious about
cutting into the EGT gas galleys after cutting into one in a 86 practice
side housing.  I later found out from Bruce T that the 91 block had much
more meat around the port that could be removed before getting into any gas
or coolant galleys - but by that time I had it buttoned up and back on the
aircraft.  Next time though!

Ed Anderson

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org