Subject: Moroso Spiral Flow Muffler
From: ACRE NL
Date: 2/5/2002, 8:33 AM


 > > > I think that is down right brilliant. Not only do the gas pulses
 > > > lose energy but they are delayed in the spiral passages and
 > > > when combined with the straight through gases they noise cancel.
 > > > Now if we can make it live with a rotary it might work great.
 > > >
 > > > Paul Lamar

 > Tom Kendall replied:
 >
 > It's nothin' more than a souped up gas version of the mixing extrusion
 > nozzles on an epoxy gun!  Son of a gun!  (pun intended).  If you've ever
 > used one of those ingenious little devices, they work extremely well for
 > homogenizing the resin and the hardener into a single stream from the two
 > separate tubes.
 >
 > I love it when technology skips from one area into another entirely
 > unrelated one.  Wonder if the folks at Moroso ever messed with extrusion
 > mixers before?


It reminded me of the extrusion mixers also, but is not quite the same.  With
the extrusion mixers, the flow is divided, and then divided again a short
distance down the tube. This is repeated ~8 times and the parts are
thoroughly mixed.

I think you could make a verson for a muffler, that might be interesting to
try (if I ever get to that point). My CAD skills are not sufficient to draw
one, so I will try sketching it and scanning a drawing.

Bill Schertz
KIS Cruiser #4045

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org