Al Gietzen wrote:

I'm using the stock primary fuel rail and injectors on my 20B, and a TWM
throttle body with it's secondary fuel rail.  The stock primary rail has a
pulse dampener at one end where I intend to weld on a -6 fitting for a
series connection from the secondary rail.  It seems easiest to just cut it
off and put on the fitting.  Is there a good reason to keep the dampener on
there?

Thanks.
Al Gietzen

There is no need for a pulse damper on that application , Al. It's a street
thing. Skip

Big improvement Skip. Now scroll down and put your message at the end
like this. Thanks for your help.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org