Subject: 20B overhaul instructions / tools
From: ACRE NL
Date: 2/7/2002, 8:46 AM

Robert Darrah wrote:

20B overhaul:

I might add that I found it better to remove only the long (16 inch) and the
short (6 inch) through bolts, leaving the 12 inch ones loosly (finger tight)
holding the flywheel end two rotors together until after you split the
E-shaft.  It holds everything together and keeps the seals from falling out.

Bob Darrah


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org