Rick Girard wrote:

I'm in the throws of designing an engine mount for the 13B
in my Long EZ.  Does anyone have, or know the whereabouts on
the web of a drawing of the engine in dwg or dxf format.  I
have the gif drawings that Ed Anderson was kind enough to
post, but I'm thinking more on the line of a drawing with
all points referenced off the E shaft center line.  My
engine is still being built up at Hayes so I can't do this
on my surface table at home.  If I had all my wishes the
engine would have a 12A front cover. If the other reference
surface was either the bell housing mating surface or the
front cover mating surface I could just measure the 12A
front cover and add it in.

Thanks to all,
Rick Girard
13B + LEZ

Here is the first of Tracy's drawing. Tracy drive me crazy sometimes with
his drawings when he uses such fine print for the dimension text.
This forces me to scan the drawings in real big so one can read the
tiny dimensions.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org