finally!

Someone else understands how nice solids are! Attached is a .dxf file of a
13b turbo block. It is close enough for rough work. I didn't use a cmm or
digitizer, just graph paper, trace, and enter, so it's not dead nuts, but it
is pretty close. The .dxf file will be 3D wireframe only. I exported for
AutoCAD 12, if you have a newer version let me know and I will export a
better solid or suface model. I have been too busy to add all the bolt
holes, front cover, turbo etc. Hope somebody can get some use out of it.

Monty

Monty, great stuff! Looks as if you have put a lot of time into this.
What would the tolerance be approximatly? +/- .xxx?
...Chrissi

OK Chrissi since you now how to convert it to a 3D drawing please 
plot it to a gif file on hard disk from ACAD and attach it to a message
for us so we all can see it.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org