Yvon Cournoyer wrote:
Several weeks, maybe several months ago, I asked for help with my 1986 13B
which was not producing full power anymore. I could still take-off and fly
my Zenith but the performance was less than what I was used to with my 13B. The engine would start readily , run smoothly and accelerate normally to about 4800-5000 rpm but would not accelerate much more past 5000 rpm.
Well, I finally discovered and corrected the cause of the loss of power. I
use a 1985 Mazda electronic distributor for ignition control and during the
winter of 1998/99 I dismantled the distributor to learn how it was put
together and to perform any necessary maintenance. I took notes during the
dismantling but still reassembled it incorrectly, and there was the reason for the loss of engine power and rpm.
Last summer, a friend offered me a similar Mazda electronic distributor which he
is not using any more. A close comparison of the two distributors showed me
that I had reassembled my distributor incorrectly. Reassembling the innards of my distributor like my friend's has restored my 13B power and rpm. After ground testing, I have test flown it and have observed that full power and rpm are restored. I will have more detailed info when meteo conditions are more favourable.
Yvon Cournoyer
Yvon any plans on showing up at OSH this year? You must have just about
the oldest and longest flying rotary airplane around. Perhaps not the
most number of hours but probably you are one of the first to fly.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org