Subject: Interest in pic 16F877 Efis or pic18c452
From: ACRE NL
Date: 2/13/2002, 9:35 PM

snips...

[Todd TC. Carrico]
The spec sheets are a must have to get these things working.  Microchip
has a very good web site with all the data sheets available has
PDF/HTML.

Watch for wrapping:
http://www.microchip.com/download/lit/pline/picmicro/families/18cxxx/390
26c.pdf

The Microchips use the same assembler throughout, so code written for
one chip, only needs slight modification to work on another.  Basically
the bigger ones have more I/O, onboard EEPROM, more PWM ports, etc.
Very good stuff for "upgrading" your application.

This company has two Basic compilers:
http://www.microengineeringlabs.com/

They both translate BASIC into Assembler, then to Intel HEX for loading.
The ASM files can be edited and recompiled if you want more control.
Both versions also allow for inline Assembler.  This is not interpreted
like the STAMP, and as a result the code runs much much faster than the
Stamp.  The basic version is $99, the Pro around $250.

This site:
http://www.rentron.com/

Has some very cool stuff as well.  Both of these sites cater to the
PIC16F84 and PICF628, but the techniques and code are the same for the
PIC16F877/876 series as well as the PIC18 series.

Hth

tc

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org