Subject: Dave Garber's oblique rads
From: ACRE NL
Date: 2/20/2002, 9:44 PM


Here is a close up picture of Dave Garber's rads.
Dave spent $1000 each for these rads made by Griffin. They
are a very special rad with 45 degree water tube alignments.
Ideal for oblique rad mounting such as under the engine.
The yellow stuff is an epoxy filler designed to seal
any leaks from the aluminum brazing process.
About a year ago I drew something up like this being
unaware of what Dave had done.

They are probably over kill for only 350 HP but Dave has
cooling potential for 500 HP each engine I would guess based on
the results we got from Tracy's cooling test. We intend
to do some water manometer pressure measurements on
Dave's cooling system as soon as we get the Bell 47 gear
box problem solved.

Dave Garber is twenty five years ahead of the rest of us.

BTW Dave is looking for somebody to fly this airplane with
fighter jet experience as it takes off and lands at 120 MPH
and 3000 feet of runway due to the high wing loading.
Top speed is estimated to be 400 MPH. It has flown 25 times so
far and is almost ready to race.

We got any jet jocks out there that would like a good time?

Paul Lamar


Where Does Dave Live?  Being the flight surgeon with a hornet squadron, at a base full of squadrons including the RAG.  Someone will know someone near where Dave Lives.

Dave Leonard

Lees Burg Florida. Just North of Lake Land. If you could pull that off
Dave that would be just what we need in the way of pilots.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org