> > > Yes, he has a Lycoming. You might take a look at the airpath of a
plans built Cozy. Not what I would call freeflowing by any means. Sure it
is
not as bad as a radiator but everything possible has been done to
compartmentalize and baffle the engine. The cylinders are each wrapped with
alumnimun sheet with an opening top and bottom, all the air has to flow up
through those slots. The air also has to make several abrupt turns. I would
guess that John's plenum with radiator, cooler and intercooler has more
open
area than a plans built Cozy and a much freeer exit path once past the
coolers. Cozies are fraught with cooling issues because the air really does
not want to go where they are putting it. The Long-EZ archives are full of
schemes for trying to improve cooling no matter what kind of scoop.
> > > ...Chrissi
> New to the list. This pertains to carnard pushers. Would vortex
generators upstream help airflow into the intake ports?
>
> Carl Murakami
> Velocity 13B wannabe
I don't think so. Even with a zero boundary layer thickness a NACA duct
is not recommended for feeding heat exchangers. It is best suited for
things that suck like jet engines. Ironically it is not even used for
those.
Paul Lamar
Actually, vortex generators DO help with the NACA ducts.
A local builder of an E-racer has been working his way through the cooling
problems. He ended up duplicating the NACA ducts on the top of the fuselage,
like the Velocity SUV uses. This provides a direct shot into a plenum over
each bank of cylinders, flow down across the cylinders, and then out through
exhaust augmentors. the exhaust augmentors are most effective for ground
operations on the Canard. He could not do much taxiing until he put in the
augmentors, now can run on the ground indefinitely with them.
He has pressure taps above and below the engine to measure the effectiveness
of the various modifications. Uses an airspeed indicator rather than the
manometer.
He test flew it with the plain NACA ducts, measuring the pressure drop across
the engine. It cooled "okay" but not great.
He then added Vortex generators just prior to the entrance of the duct, the
pressure drop across the engine was raised substantially, and the engine
cooled much better. He experimented with 'where' to place them by repeated
test flights with the VG's in different locations, until he found the
greatest pressure drop.
He also has a small NACA duct to provide cabin air. It is located at the
fuselage centerline at the intersection of the canopy and the forward
fuselage. It has a moveable floor that lets you close it off when you don't
want air. By adding VG's to that duct, the air delivery was improved
significantly.
Bill Schertz
KIS Cruiser #4045
It still sounds like he is dealing with an air cooled engine.
Apples and oranges folks. What has all this got to do with
radiators? NACA themselves, the inventors of the NACA duct,
say: "don't use them with radiators!"
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org