Subject: Canard cooling air intake
From: ACRE NL
Date: 2/24/2002, 9:09 PM


Having said that here is another anecdote for you. Someone got the
bright idea of shaving the scoop off a P51 Reno racer and replaced
it with a NACA duct. Guess what?
Paul Lamar

Paul, I don't think anyone is disputing that a P-51 scoop is better than a NACA scoop. Yes, I read the NACA papers. I think some of us canardians have made mid-stream decisions to go the rotary route and are trying to do so without taking a chain saw to the bottom of the plane (just yet). It has also proven out that the P-51 scoop slowed the plane down. Maybe we are all hard headed and don't want to hear the truth but would rather hang on in naive optomism that until someone flys this configuration and finds out -IT WON"T WORK-
Take a closer look at the flow.jpg and you can see the baffles that are wrapped around the cylinders... I do not know what the total open area is for the 4 baffles but it can't be that much.
If any air is going to go throught the canard cowl, it has to get through those 4 slots.
How that area compares to the total of one radiator, one oil cooler and one intercooler I have no idea but my guess was that it would be less than the standard Cozy/Lycoming configuration.
Also when in the climb configuration is there a higher pressure under the belly of a canard?
...Chrissi

I am not here to solve the cooling problems on an air cooled engine Cozy.
Bug Nat Puffer. It is his responsibility. If you want to cool your
13B use a P51 scoop. Sorry about the drag.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org