Al Gietzen wrote:
Al Gietzen wrote:
Here are some pics of the custom oil cooler for my 20B built by Griffin.
It
is a very nice piece of work, and very heavy duty (also heavy, 10 lbs) -
designed for 125 psi operating pressure. The core is 20.5" long, 5"
wide
and 3.34" thick. Internal turbulators in the wide tubes also hold them
together; they are brazed in. 14 fins/in. Design point is 1600 cfm
air, 16
gpm oil, 220F oil in, 90F air in, resulting in heat rejection of 2330
Btu/min. Good for 220hp continuous on a hot day.
Whoops; not the picture I intended to attach. Try this.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org