Subject: question for 'glass airframe builders
From: ACRE NL
Date: 2/25/2002, 11:28 AM


Charlie and Tupper England wrote:

I need some info on repairing leaks in fiberglass fuel
tanks.I'm hoping for a non invasive procedure, something
like the metal tank guys do with low viscosity sealants
applied to the outside & a light vacuum applied to the tank
to pull sealant into the leak.

Have any of you 'glass airframe guys had any experience with
this?

If you can help, please email me offline at:

cengland@netdoor.com

Thanks,

Charlie England

I think that is of intense interest to all of us building composite
airplanes.
Pin hole leaks in composite airplane fuel tanks appears to be a very
common problem.

Paul Lamar


The tank sealant used on most "wet wing" metal planes is called Pro Seal and
it adhears to fiberglass as well.  This stuff is resistant to auto fuel with
alcohol and works great but is not "sloshable".   All of the sloshing
compounds (both aircraft and automotive) I've tried have failed the auto
fuel test.  The small amount that I ran down the seams in my tanks (thank
heavens I didn't actually slosh it) peeled off after about a year and lodged
in the gascolator screen.  BTW, this is one reason I like a coarse filter
that can be inspected in the fuel system before the final fuel filter.  You
can see trouble coming before it becomes an in-flight emergency.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org