Subject: Canard cooling air intake
From: ACRE NL
Date: 2/26/2002, 9:07 PM


I think there is a Vari-EZ guy in Texas who has had
a lot of luck
with downdraft cooling. He has scoops on top of the
strakes.
I always thought it was backwards, taking low
pressure air from
the top and exiting into high pressure at the bottom
(in a canard).
But since my knowledge of air-cooled engines is so
limited I
didn't realize the engines were designed for
downdraft cooling.
Makes sense since most airplanes are tractors.
Great info Paul, but let's get back to the future:
water-cooled
rotaries!
--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

Let me tell you about my Idea about cooling the Cozy.
>From the start I intended to put all my efforts in to
reducing the under the cowl pressure with active air
outlets: On the turbo side with exchaust augmentation
and on the other side with 6" electric inline blower
rigged to extract hot air on demand.
Also the intake on the NACA will be made with movable
lip able to vary the opening from a scoop, to reducing
the inlet on cold days to controll engine temp.
Bulent

Won't work bulent. Don't do it. You will waste your time.
Could hurt that rare Cosmo two rotor you have on first flight.

Put a P51 scoop on it. You can buy these beauties off the shelf
as hood scoops from the Hot Rod industry.

Paul Lamar

This one should work fine. Turn it upside down and glue it to the bottom
of the Cozy. Foam the inside to smooth the walls of the duct.

Paul Lamar


Here's some photos of roll your own scoops.  You can modify shape and size to
suit your own needs.

http://www.cardiology.uiowa.edu/rguerra/velocity/airInlets/airInlets.html

Carl Murakami

Some of these have no boundary layer air bleed which is not good.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org