Subject: Canard cooling air intake
From: ACRE NL
Date: 2/26/2002, 11:37 AM


I am not here to solve the cooling problems on an air cooled engine Cozy.
Bug Nat Puffer. It is his responsibility. If you want to cool your
13B use a P51 scoop. Sorry about the drag.

Paul Lamar

Give it up, Chrissi. If it doesn't work, I'll buy Paul another "told you so"
badge and buy a chainsaw. If it does work, I'll publish detailed results and
buy a "nah nah na nah nah" badge for myself. In the meantime, build your
strakes. :)
Regards,
John Slade


OK I am feeling a bit better now. Been sicker than anyone should be and still be alive.
Pay attention. I am only going to talk about this once.
Here is how to cool an AC engine Canard about as well as can be expected
using the belly NACA duct. Divide the flow into three parts beyond the lip. Center for
the carb. Duct the outer two to closely fitting muffs that just fit the bottom
of the cylinders. Parts of this may have to be made from SS. Wrap the
relatively thick 321 SS exhaust pipes with high temp insulation and keep them
out of the closely fitting muffs that just fit the bottom of the cylinders.
The exhaust pipes are heating the air before it gets a chance to cool
the cylinders and valuable cooling air is escaping around the exhaust
pipes openings in the cowl. They must be isolated.

In no way shape or form will this work for rads and a rotary. Don't even try.

This is what you must go through to make a down draft cooling system engine
work in an updraft cooling system airplane. Special updraft cooling
system engines with exhaust ports on top of the cylinders are available
in certain sizes for use in updraft cooling system airplanes. Duh!

If you think this is a lot of trouble use two P51 scoops on the top of
the cowl and cool the O-320/IO-360 like they were designed to be cooled.
Down draft cooling! Use a boat tail with vertical cowl flaps. Now you won't
have to worry about the exhaust pipes heating the air and leaking off
valuable cooling air. Use a small belly NACA duct for carb air.

Paul Lamar


I think there is a Vari-EZ guy in Texas who has had a lot of luck
with downdraft cooling. He has scoops on top of the strakes.
I always thought it was backwards, taking low pressure air from
the top and exiting into high pressure at the bottom (in a canard).
But since my knowledge of air-cooled engines is so limited I
didn't realize the engines were designed for downdraft cooling.
Makes sense since most airplanes are tractors.
Great info Paul, but let's get back to the future:  water-cooled
rotaries!
--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org