Subject: question for 'glass airframe builders
From: ACRE NL
Date: 2/26/2002, 10:50 AM


 > > Charlie and Tupper England wrote:
 > > >
 > > > I need some info on repairing leaks in fiberglass fuel
 > > > tanks.I'm hoping for a non invasive procedure, something
 > > > like the metal tank guys do with low viscosity sealants
 > > > applied to the outside & a light vacuum applied to the tank
 > > > to pull sealant into the leak.
 > > >
 > > > Have any of you 'glass airframe guys had any experience with
 > > > this?
 > > >
 > > > If you can help, please email me offline at:
 > > >
 > > > cengland@netdoor.com
 > > >
 > > > Thanks,
 > > >
 > > > Charlie England


 > > I think that is of intense interest to all of us building
composite
 > airplanes.
 > > Pin hole leaks in composite airplane fuel tanks appears to be a
very
 > > common problem.
 > >
 > > Paul Lamar


 > The tank sealant used on most "wet wing" metal planes is called Pro
 Seal and
 > it adhears to fiberglass as well.  This stuff is resistant to auto
fuel
 with
 > alcohol and works great but is not "sloshable".   All of the
sloshing
 > compounds (both aircraft and automotive) I've tried have failed the
 auto
 > fuel test.  The small amount that I ran down the seams in my tanks
 (thank
 > heavens I didn't actually slosh it) peeled off after about a year
and
 lodged
 > in the gascolator screen.  BTW, this is one reason I like a coarse
 filter
 > that can be inspected in the fuel system before the final fuel
filter.
 You
 > can see trouble coming before it becomes an in-flight emergency.
 >
 > Tracy Crook
 > tcrook@rotaryaviation.com
 > www.rotaryaviation.com


[Todd TC. Carrico]
Something else to watch out for is that Foam is near by, and doesn't
tolerate fuel well.  If you are fortunate enough to have urethane foam,
you may be OK.  Do some tap testing to find any delam if you can reach
it.  May indicate that foam has been eaten away...

tc

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org