Subject: Cooling a liquid cooled aircraft engine
From: ACRE NL
Date: 2/27/2002, 11:17 AM


Cooling a liquid cooled engine is fundamentally
and intrinsically much different than cooling an air cooled
engine. Close does not count with liquid cooled engines.
Pregnant or not pregnant, dead or not dead, swimming or sinking. It
is a black and white situation. Low cooling drag initially is
way down on your list of priorities.

If the temperature of the bulk coolant goes beyond the boiling
temperature
overall boiling occurs.  All hell breaks loose and the coolant is
forced out of the water jacket through the pressure cap overflow valve
by
massive amounts of hot vapor or steam. Once boiling of the coolant
starts it
is all over in an instant. Less coolant, hotter metal, more steam, less
cooling. One might say the cooling system pops like a pop corn. Thus the
cooling system becomes extremely unstable. Its like critical mass in
a nuclear explosion. This is THE major difference between the air cooled
engine and the liquid cooled engine. Needless to say this cannot be
allowed to happen in an aircraft engine.

A few bad experiences like this during climb out can be very
discouraging
indeed.

Don't take half measures. Don't experiment with ducts, rads or scoops
that
might or might not work. Use the best plumbing available. Learn from
history.
Look at all the engineering  work that has been done in the past 100
years
and copy the best. If something looks marginal go for the larger size,
the bigger hammer, the best possible solution.

Later, when you have flown for awhile under all weather conditions you
can think
about reducing the cooling drag or improving the cosmetics.

Paul Lamar


Excellent overview of the cooling situation.  Regardless of the
installation,  you can't fool mother nature.    Submerged inlets or
inadequate outlets are guaranteed  engine killers.  Obey these rules and
you can enjoy creative freedom with radiator placement.    Jerry


Also I might add it does little good to back off on the throttle.
You can still ruin your engine at idle with no coolant in the block.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org