Subject: question for 'glass airframe builders
From: ACRE NL
Date: 2/28/2002, 6:27 PM


The tank sealant used on most "wet wing" metal planes is called Pro
Seal and
it adhears to fiberglass as well.  This stuff is resistant to auto
fuel with
alcohol and works great but is not "sloshable".   All of the
sloshing
compounds (both aircraft and automotive) I've tried have failed the
auto
fuel test.  The small amount that I ran down the seams in my tanks
(thank
heavens I didn't actually slosh it) peeled off after about a year
and lodged
in the gascolator screen.  BTW, this is one reason I like a coarse
filter
that can be inspected in the fuel system before the final fuel
filter.  You
can see trouble coming before it becomes an in-flight emergency.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

Thanks to Tracy & all the others who responded. Now that I
know Proseal sticks to fiberglass, I'm going to try that
(with suction) first.

I'll post results when available.

Charlie England


BTW, Proseal is just a trade name for the generic Polysulfide which was
mentioned in other posts.  You will recognize it in use because when
the two
parts are mixed it smells like a cross between cat crap and rotten eggs.
The low viscosity brush on variety should be ideal for fixing fiberglass
leaks.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com


FYI,
  ProSeal comes in various viscosities & cure times. The thin "brush on"
type referred to by Tracy is type A. Next is type C. This is recommended
for sealing ribs to skins, etc. Last is type B (which Van's supplies with
their kits) Type B is recommended for fillets and sealing large gaps. The
cure times range from 1/2 hour to 24 hours. Sooo.... the can will read
something like
A-2
meaning it is the thinnest viscosity and has a working life of 2 hours. I
should mention that the working life is extremely dependent on ambient
temperature. These products have a limited shelf life (9-12 months at room
temps). You can easily double the shelf life if you store them in a
refrigerator when not in use.
  You can also "thin" your ProSeal by mixing it with MEK. (Man I wish Van's
would supply C instead of B!!)  Surface cleanliness isn't the only thing
with ProSeal, it's EVERYTHING!

Charlie Kuss
RV-8A fuselage
Boca Raton, Fl.

PS  Don't ask me why the viscosity doesn't run A to C,   thin to thick. I
have no clue. I guess they just did it that way so that it would be counter
intuitive!!

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org