Subject: question for 'glass airframe builders
From: ACRE NL
Date: 3/2/2002, 9:51 AM


FYI,
  ProSeal comes in various viscosities & cure times. The thin
"brush on"
type referred to by Tracy is type A. Next is type C. This is
recommended
for sealing ribs to skins, etc. Last is type B (which Van's supplies
with
their kits) Type B is recommended for fillets and sealing large gaps.
The
cure times range from 1/2 hour to 24 hours. Sooo.... the can will read
something like
A-2
meaning it is the thinnest viscosity and has a working life of 2 hours.
I
should mention that the working life is extremely dependent on ambient
temperature. These products have a limited shelf life (9-12 months at
room
temps). You can easily double the shelf life if you store them in a
refrigerator when not in use.
  You can also "thin" your ProSeal by mixing it with MEK. (Man I wish
Van's
would supply C instead of B!!)  Surface cleanliness isn't the only
thing
with ProSeal, it's EVERYTHING!

Charlie Kuss
RV-8A fuselage
Boca Raton, Fl.

PS  Don't ask me why the viscosity doesn't run A to C,   thin to thick.
I
have no clue. I guess they just did it that way so that it would be
counter
intuitive!!


Charlie,

Do you know what company sells Proseal A?

Jerzy

Jerzy,
  All of the manufacturers make A through C. I would contact someone like
Wicks, or Aircraft Spruce to purchase it. If you live in an area of the
world that has local aviation suppliers, I'd try the local suppliers first.
Brand name is really irrelevant. All the products are similar.
Charlie Kuss


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org