Subject: Two Stroke Engines (Was PSRU Questions)
From: ACRE NL
Date: 3/4/2002, 3:13 PM


I am also interested in your "call" on why OMC
with the newer 4 strokes, direct injection, etc have not revived the Wankel which
they had used in the past. - Vance Jaqua


I visited OMC back in the 1980s when I worked for Deere on their rotary project. We were interested in learning about their tribological system (apex seal and trochoid coating). OMC had already sold off the tooling for the rotary outboard powerhead (believe Moller now is the owner). As I understand it, OMC developed the rotary as a hedge against possible two stroke emissions regulations. Those regulations did not materialize (until very recently), so OMC didn't put the engine into production. I think Paul has it right, that the two stroke engines are cheaper to produce when you have an established infrasturcture to do so. OMC recently went through some severe financial difficulties right as they were developing and introducing their new "cleaner" outboards. I doubt they would have decided to apply the resources required to redevelop their rotary technology. Now that they have invested in a two stroke emissions solution (Ficht injection), I doubt that they will look again at rotary technology.

Jon

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org