Marc Wiese wrote:
For Joe-
Series 5 motors don't have an EGR valve. So on the series 5 middle
housing, there won't be an EGR mount.<<
Look through the lower spark plug hole at the rotor facing recess. If
the face is machined (vertical machining marks) then they are high
compression, of they are rough cast, they are lower compression
rotors.<<
If the engine is complete, the TPS would be a quick way to check.
IIRC, the earlier engines had one 'plunger' on the TPS and the 89-91's
have 2. I believe the water inlet location is different between them
too, but I can't remember the specifics.<<
This won't help with the rotors themselves but the 89-91 motors have
an electronic oil metering pump, older motors have mechanical pumps.
This would be easy to spot externally<<
Marc Wiese
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org