What is your estimate of the life of the carbon/aluminum in 150 HP
continuous
use at about 5500 RPM?
Paul Lamar
I run an air filter on everything all of the time. I still have the first set
of seals I raced on, and I could put them in a new engine tonight. They were
in one engine for four years. I run more [2 cycle] oil than is required and feel this
is a real plus. You would probably have the engine down doing side seals and
corner seals before the apex seals need to come out.
Lynn E. Hanover
When you say "more oil than required" could you put that in the form of a fuel/oil ratio? Yvon.
We use 6oz in each 5 gallon container. I mix it well in a little less than 1 gallon of fuel in a milk jug and then pour it into a 5 gallons. I use Redline synthetic 2cycle oil.
Lynn E. Hanover
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org