Subject: Cut away Aluminum housings
From: ACRE NL
Date: 3/14/2002, 9:13 AM


Paul, did you cut the housing open on this picture?  If so how
did you do it.
Royce

I did not do it but it was done on a mill. Probably with a fly
cutter.
Note: you don't need the side ports.

Paul Lamar

True Paul, no need for the side port to be in the way.
We have been looking for someone locally that has a large enough
band saw to cut a housing in half for us so we would have both patterns.  So
far no one can do it, or don't want to try.
Did find a man that said he would see if he could come up with a way
to do it on his saw.  We'll see.  May have to build a large band saw and do
it ourselves.
Royce


It won't fit in a DoAll?


A DoAll?  ???
Royce


A brand of big heavy duty band saw. Very ubiquitous.


Paul, I have a saw that will cut 18"x 18". Send me the
   part and I will saw as needed. Might even be
interested in machining an aluminum end housing.
John Moran

Thanks John. Too bad about that six pinion planet carrier. How were
we to know Ford was coming out with a stock version. They were probably
reading this news letter :-) I'll send your email address to Royce
and he can send the the housing he wants sawed up.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org