Subject: 2 cycle oil air cooled or water cooled?
From: ACRE NL
Date: 3/16/2002, 9:57 PM


Ed,
Probably because the water cooled engines have tighter tolerances.
George (down under)


Good Point, George

    I presume as long as the 2 cycle oil meets the required
specification it
will be OK.  However, I have noticed a considerable difference in the
price
of 2 cycle oil which makes you wonder what you are getting additonal for
the
higher priced stuff.  For example a gallon (U.S) of Pennzoil Marine
Synthetic is USD $18.57 a gallon.  AMZOIL on the other hand for their
ATC-01
2 cycle oil is $30.60 a gallon.  Sure makes you wonder what the real
difference is.

Ed Anderson

Ed,
Could be wrong, but the marine synthetic should be ok. Recently the marine
13b supplier advised what he used- it was a synthetic but apart from that I
can't remember what it was. I'm sure he would have done extensive research
on his needs.Then again there may be other factors considered necessary for
marine use.
George (down under)

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org