Royce Wise wrote:

>From looking at all the information that I have, I assume that a 20G engine
could be built from 13B housings and rotors with the addition of a 20G
e-shaft.  If that is so then a single rotor 6.5A  :-) could be built with 13B
rotor end housings, and a modified 13B shaft?
It appears that they just added a rotor and a longer shaft to make the 20G.
Am I wrong?
Royce

You are correct Royce. You will also need a 20B intermediate housing.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org