Mike Collier wrote:
OK, I've been reading all the e-mail traffic and doing some research on my own, but I think I still may be missing something. What's right for a 91 13B Turbo II that will be going on a Long EZ project. I'm thinking 6500 rpm's @ about 225 hp using a Garrett T04 Turbo. What's too much and what's too little? Will street porting do it or Bridge porting, pporting ect. What is the drawback of the different types of porting when used in an aircraft application and is porting something you would attempt yourself using a purchased template or is it best left to professionals?
Signed slightly confused
Mike C.
With a turbo you don't need to worry about a thing. One or two psi more boost
can make up for a lot of porting and manifold sins.
If you do port it is not hard to do it yourself. Use one of the templates.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org