Paul and Tom,
      It has been indicated that the manifold will fit
both the 4-port and 6-port engines.I have several 6-port
engines and received a 4-port 13B Cosmo turbo engine only
yesterday.The bolt pattern of the 4-port intake manifold
is different than the 6-port plus has an additional bolt.
      Has this bolt pattern difference been noted and is
a dual pattern possible or will the customer need to say
which engine(4 or 6 port)the manifold is for?

      Kelly Troyer

Very surprising Kelly.  The Cosmo engine must be a different animal.  After
some devcon port matching, I bolted my old 6 port lower manifold to my 89
turbo 4 port with no problems.  Let us know what the differences are when
you get a handle on it.

Tracy Crook

Snip
      Tracy,
         I have not seen the intake manifold bolt pattern for the 93-95 13BREW
but I suspect it is the same as the 13B Cosmo. Speak up somone that knows because
Tom's new manifold with current bolt pattern may not fit engines with 13BREW or
13B Cosmo side housings. Are you listening Chrissi? I thought your 13B used 93-95
side housings. One way to put this question to rest is for  me to buy a 13BREW
intake gasket.

      Kelly

Send it to me Kelly after you check it. Besides how many have 93 and later 13B's?
Not many I will wager.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org