Subject: engine mounts for everybody (almost)
From: ACRE NL
Date: 3/17/2002, 11:04 AM


Jerry Hey wrote:

Paul,   I would like to get the firewall hard points for all the
popular
designs. This would include the Cozy, Kiss Cruiser,  RV-4, RV-6 tri
gear  and conventional among others.   <chop>     Jerry

Check the web site I think many of them are on there.
Here is the Kis Crusier I think.

Paul Lamar


Jerry, if you still need the RV-4 info let me know and I'll give you
what I
have.  Is this for mounting the same as Paul has done with the motor
plate
on the redrive?  This must be a lot narrower for the RV-4.

Mike McGee, RV-4 N996RV, O320-E2G, Aurora, OR
13B in gestation mode

Mike,    Yes,  nearly the same as Paul's.  I do need the RV-4
numbers.   The Motor Mount plate can be made as narrow or wide as the
situation requires. I expect  it to vary with every  each  design.
I will also need to know the distance from the firewall to the outboard
face of the prop flange. Thanks,  Jerry

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org