Subject: 13Brew turbo manifold
From: ACRE NL
Date: 3/19/2002, 10:15 AM


Don Dunbar wrote:

 Attached  photos of  my intake manifold and the garage of toy's.
 The white toy has done 10000 miles since new.
 The toy in yellow many hour but zero flying hours.
 How much are these intake manifolds going to cost.
 Regards Don


A couple of pics at a time.
This 93 turbo manifold flange area and bolt pattern look almost identical
to the 88 turbo manifold except the runners are larger on the top.
So where it bolts to the upper part of the manifold is different.
At this time I am willing to bet the new manifold will fit the 93 fine.
Paul Lamar


Paul my engine has the split turbo exhaust manifold and is what we Ozzi' call a series 5 engine.
Year of manufacture is 1989 to 1991.
Regards Don

What do you mean by split turbo exhaust? Is this intake manifold from that engine?
Paul Lamar


The exhaust manifold has the division between the port going into the turbo charger and as posted many times the the turbo manifold that does not crack all the time. I have looked for a photo but am unable time find.
I will take a photo of this in the morning and will post it.
Regards Don


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org