Here are some captures of RB Wagner catalog on the right
bends to buy. This is the three inch radius stuff.

I think if you shop around you can get better
prices from RB Wagners distributors than you can direct from RB Wagner.

http://rbwagner.com/

I checked and they don't appear to have .065 in stock. All they
stock apparently is sched 40 which according to the drawing is
.140 thick. When I measure it it is more like .125 thick.


We might be able to get a quantity buy of custom .065 wall if people are

interested.

Also we could specify a longer straight leg or even a jog at the end
for the fuel injector similar to this drawing of my Kis installation.
Save a lot of pipe welding. And be a bit lighter.

Anybody interested in pursuing this?
Paul Lamar

check kinsler fuel injection they may have what you need.
smale@ncinternet.net

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org