> > Ken Welter wrote:

 > >
 > >   Another mod that I have made is that I plugged the rear control
 > > valve and made a external valve that I can adjust.

 > > > How did you do it Ken? Less talented minds want to
     know (pick your brain)!

       Kelly Troyer

  This is a photo of the relief valve that I made, I just tap off the
return line and send the return oil back to the case, note there are
two return lines from the valve as you need to relieve pressure from
the spring side of the plunger also to stop a hydraulic lock. As for
the valve in the rear housing I just welded the holes shut on it.

   Ken Welter

Ken please cut the resolution on your digital camera. I can not send
out files much over 100K. I cut the the resolution on this one for you. As you can see
it still looks fine as most monitors can only deal with one million pixel's.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org