Subject: 93 and later intake manifolds
From: ACRE NL
Date: 3/22/2002, 6:53 PM

I got the gasket Marc. Thanks.

Breath easier 93 13B and Cosmo folks its going to work.
Apparently Mazda moved the intake manifold and end housing ports
up 25 mm on the 93 and later engines. So all we need do is
move the center hole up about 12 mm and the two holes on either
side of the center housing down about 25 mm. This will require
a minor modification to the pattern.

All other holes match up except the upper left hole. That one we can handle
with the Chevy V8 head-bolt-in-the-intake-runner trick.
I will do a drawing on that shortly to show you how that works.

Moving the center hole up 12 mm on the 93 and later engines gave Mazda 
a cleaner shot at the two center housing ports. the bolt boss does not intrude
so much on the ID of the center runners.  Moving the whole manifold
and ports up gave Mazda more turbo clearance and a better and  more
straight path for the intake runners for better breathing.

We will need a couple of extra machining operations so the 93 and Cosmo 
version will cost about $50 more. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org