Subject: 93 and later intake manifolds hold down bolt
From: ACRE NL
Date: 3/23/2002, 12:49 PM

Bulent Aliev wrote:

Paul, I measured the distance on the Cosmo and it's: from the base to the
top (upper surface) of the stud: 8.1" The stud is 8mm, so the distance from
the base to the center of the stud is 8.1" minus 4mm. You figure it out :)
I'm no engineer.
Bulent

Thanks Bulent. That is what I thought.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org