Subject: 93 and later intake manifolds hold down bolt.
From: ACRE NL
Date: 3/23/2002, 9:28 AM


Do me a favor all you 93 up and Cosmo folks and please measure this
distance for me. This is a double check.

Guesstimate = 8.65"
...Chrissi


That is interesting. Are you sure that is not 8.065 inches to the center of the
stud?


Measurements, REV-B
Oops, its 8.065"... its only a silly zero, I mean after all they don't count, they are worth nothing after all?
...Chrissi

Blonds have trouble with zero's :-)> That is more like it. You had me worried for a 
second or two. That means it is going to work.
Here is a side view of the hold down bolt trick.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Casting6F2.jpg