Subject: Ducted fans and turbofans
From: ACRE NL
Date: 3/23/2002, 1:57 AM


<snip>
There is such a design as your jpeg file attached and that is the
Mini-imp that needs 60 to 80 hp. Go to www.mini-imp.com
This would also make a great single rotor plane.
Regards Don


Familiar with the work of M. Taylor, as well as: K. Johnson, W. Von Braun,
R. Goddard, W.P. Lear, B. Rutan, P. MacReady, E. Lesher, F.X. Wortmann, J.
Roncz, J. Bede, A. Strojnik, M. Hollmann, B. Charmichael, L. Giertz, J.
Miller, (The evil G. Richter who suggested that I design my own aircraft and
created this monster :-) and many more which elude me now (apologies) (won't
even get into Bernoulli, Euler, Abbott and Von Doenhoff, the early pioneers,
etc). See :

http://www.webcamsue.nl/vmax.html.

Success is built on the shoulders of giants goes the quote.

Although similar to the Mini-imp, Vmax probe, Lear Fan, Nomad, Teal, etc, my
design is significantly different. The landing gear is fixed, thanks to the
small dia of the direct drive prop, and the airfoils and tail surfs are very
different. As are a Piper Cub and a Lancair 200.  My design is intended to
be a flying super bike, capable of landing at sane speeds, with reasonable
stall behavior. The cooling system is much more refined than previous
designs. Although a neat design, (which obviously influenced me) the
Mini-Imp was never intended to incorporate a 250 hp rotary. Trying to use a
single rotor with a long drive shaft invites disaster, or at a minimum a
large weight penalty, because of torsional resonance issues.

My aircraft is designed around the engine. All out performance for one
person.

Mission profile:

cruise:         300 mph
land at:        55-60 mph (65 gross wt)
range:         1000  miles
baggage     50 lbs
1X                175 lb pilot
1X                big grin

Monty


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org