The O-ring failure was an anomaly. We now have a handle on the correct size
to use. Bad idea to save a few bucks and not use teflon encapsulated O-rings.
One coolant leak and an engine overheat can destroy the stock coolant O-rings.
Besides that the TES oil o-rings are cheaper than the stock Mazda oil O-rings.
Sorry, but I'm not comfortable with "teflon encapsulated". For one thing I get the
idea they may not seal as well (stiffer?). Let someone else be the guinea pig and
accumulate long trouble free hours.
I like "cheaper" but need some convincing that they're better and won't cause
damage.
Any answers to my other questions - especially how the tension bolt failure could
relate to air-in-coolant?
Finn
Lots of people have run them in racing for years. In fact Lynn Hanover uses
teflon coated wire no less. How stiff is wire? :-)> Surely the silicone rubber core
is softer than wire? Ed Anderson swears by them in
his engine. Perry Mick is running them in his engine no problem.
Your tension bolt failure relates to air in cooling as in the pressure
in the combustion chamber is leaking past the O-rings into the water jacket.
The end housings are deflecting slightly away from the rotor housings.
One of the things about the teflon O-rings is they will take a little leak
of combustion gases without melting so readily.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org