Subject: Sealing oil leaks
From: ACRE NL
Date: 3/24/2002, 2:29 PM

Perry Mick wrote:

Does anyone know of something that will seal oil leaks
externally?  Most people assemble the engines with no
gasket between engine and front cover, I seem to have
a very small leak on the right front of the engine.  Oil
accumulates on top of the baffle plate between the
engine and oil pan and runs out a pinhole leak.  It is
a small amount, but it's annoying to have oil on the
cowling, fan and stator blades after every flight.
I've tried a couple things to try to seal it, but the heat
and the hot oil with consistency of water seem to get
right through.

I run the engine at idle on the ground and can't even
see a drop, but do have the location of the leak narrowed
down regardless.
--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org